Removal

3MZ-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

3. REMOVE HOOD TO COWL TOP SEAL Removal

4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

7. REMOVE COOL AIR INTAKE DUCT SEAL Removal

8. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH Removal

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

11. REMOVE AIR CLEANER BRACKET Removal

12. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Disconnect the engine coolant temperature sensor connector.





(b) Remove the engine coolant temperature sensor and gasket.