Installation

3MZ-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.

(b) Install the crankshaft position sensor with the bolt.





Torque : 8.0 Nm (80 kgf-cm, 71 in-lbf)

(c) Connect the crankshaft position sensor connector.

2. INSTALL FRONT FENDER APRON SEAL RH

3. INSTALL FRONT FENDER LINER RH

4. INSTALL NO. 1 ENGINE UNDER COVER Installation