Installation

3MZ-FE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

1. INSTALL VVT SENSOR (for Bank 1)

(a) Apply a light coat of engine oil to the O-ring on the VVT sensor.





(b) Install the VVT sensor with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Connect the VVT sensor connector.

2. INSTALL VVT SENSOR (for Bank 2)

(a) Apply a light coat of engine oil to the O-ring on the VVT sensor.





(b) Install the VVT sensor with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Connect the VVT sensor connector.

(d) Install the heated oxygen sensor connector (Bank 2) to the wire harness bracket.





3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

4. INSTALL NO. 2 ENGINE ROOM SIDE COVER LH Installation

5. INSTALL COOL AIR INTAKE DUCT SEAL Installation