Installation

3MZ-FE IGNITION: IGNITION COIL AND SPARK PLUG: INSTALLATION

1. INSTALL SPARK PLUG

(a) Install the 6 spark plugs.





Torque : 18 Nm (183 kgf-cm, 13 ft-lbf)

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 6 ignition coils with the 6 bolts.





Torque : 8.0 Nm (80 kgf-cm, 71 in-lbf)

(b) Connect the 6 ignition coil connectors.





3. INSTALL INTAKE AIR SURGE TANK Installation

4. INSTALL EMISSION CONTROL VALVE SET Installation

5. INSTALL AIR CLEANER BRACKET Installation

6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

8. ADD ENGINE COOLANT (for Engine) Service and Repair

9. INSTALL NO. 2 ENGINE ROOM SIDE COVER LH Installation

10. INSTALL COOL AIR INTAKE DUCT SEAL Installation

11. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation

13. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation

14. INSTALL HOOD TO COWL TOP SEAL Installation

15. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation

16. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Service Precautions.

18. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection