Removal

3MZ-FE IGNITION: IGNITION COIL AND SPARK PLUG: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Service Precautions.

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

4. REMOVE HOOD TO COWL TOP SEAL Removal

5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

6. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

7. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

8. REMOVE COOL AIR INTAKE DUCT SEAL Removal

9. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH Removal

10. DRAIN ENGINE COOLANT (for Engine) Service and Repair

11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

12. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

13. REMOVE AIR CLEANER BRACKET Removal

14. REMOVE EMISSION CONTROL VALVE SET Removal

15. REMOVE INTAKE AIR SURGE TANK Removal

16. REMOVE IGNITION COIL ASSEMBLY

(a) Disconnect the 6 ignition coil connectors.





(b) Remove the 6 bolts and 6 ignition coils.





17. REMOVE SPARK PLUG

(a) Remove the 6 spark plugs.