Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the cruise control main switch as shown in the illustration.





(b) Connect the connector.

(c) Install the 2 screws.





Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

2. INSTALL STEERING PAD Installation

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

6. INSPECT STEERING PAD Installation

7. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.