On-Vehicle Inspection

2GR-FE ENGINE CONTROL SYSTEM: ACTIVE CONTROL ENGINE MOUNT: ON-VEHICLE INSPECTION

1. INSPECT FRONT ENGINE MOUNTING INSULATOR ASSEMBLY

(a) Inspect the front engine mounting insulator assembly.

(1) Connect Techstream to DLC3.

(2) Start the engine and turn the Techstream main switch on.

(3) Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the ACM Inhibit.





(4) Check if the front engine mounting insulator assembly operates in accordance with tester operation.

Standard:

The front engine mounting insulator assembly operates normally in accordance with tester operation.