Removal

METER: COMBINATION METER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the terminal to prevent airbag deployment Service Precautions

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

(a) Disengage the 4 claws and 4 clips, and remove the instrument cluster finish panel assembly.





3. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the 4 screws.





(b) Disconnect the connector and remove the combination meter assembly.