Removal

LIGHTING (INT): ROOM LIGHT (for Rear): REMOVAL

1. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

(a) Using a screwdriver, disengage the 4 claws and remove the lens cover.





HINT
Tape the screwdriver tip before use.

(b) Disengage the claw and guide in the order shown in the illustration, and remove the room light cover.





HINT
Use the same procedure for the RH side and the LH side.

(c) Using a screwdriver, disengage the 2 claws [A] as shown in the illustration.





HINT
Tape the screwdriver tip before use.

(d) Disengage the 2 claws [B].

(e) Using a screwdriver, disengage the 4 claws and remove the No. 2 room light assembly.