Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RESET SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal

5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal

6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal

7. REMOVE FRONT CONSOLE BOX ASSEMBLY

HINT
Refer to the instructions for Removal of the front console box Removal.

8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

10. REMOVE FRONT NO. 1 CONSOLE BOX INSERT Removal

11. REMOVE FRONT NO. 2 CONSOLE BOX INSERT Removal

12. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Removal

13. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Removal

14. REMOVE NO. 1 SWITCH HOLE BASE Removal

15. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

16. REMOVE TIRE PRESSURE WARNING RESET SWITCH

(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the instrument panel finish panel sub-assembly.