Installation

SEAT: FRONT SEAT ASSEMBLY (w/ Seatback Board): INSTALLATION

1. INSTALL FRONT SEAT ASSEMBLY RH

(a) Place the front seat assembly RH in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Connect the connectors under the seat.

(c) Temporarily install the front seat assembly with the 4 bolts.

(d) Lift up the seat track adjusting handle and move the seat to the rearmost position.

(e) Tighten the 2 bolts on the front side of the seat.





Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

(f) Lift up the seat track adjusting handle and move the seat to the foremost position.

(g) Tighten the 2 bolts on the rear side of the seat.





Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

2. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK

(a) During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously.

If the seat adjusters do not lock simultaneously, loosen the bolts securing the seat to adjust the adjuster position.

3. INSTALL INNER SEAT TRACK COVER RH (for 2WD)

(a) Engage the guide.





(b) Engage the claw and install the inner seat track cover RH.

4. INSTALL INNER SEAT TRACK COVER RH (for 4WD)

(a) Engage the 2 claws and install the inner seat track cover RH.





5. INSTALL OUTER SEAT TRACK COVER RH

(a) Engage the 2 claws and install the front outer seat track cover RH.





6. INSTALL FRONT SEAT HEADREST ASSEMBLY RH

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

8. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)

HINT
Inspect the SRS warning light Diagnosis System.