Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH

(a) Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel finish panel sub-assembly.





2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL NO. 1 SWITCH HOLE BASE Installation

4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Installation

5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Installation

6. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

8. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

10. INSTALL FRONT CONSOLE BOX ASSEMBLY

HINT
Refer to the instructions for Installation of the front console box Installation.

11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation

12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

15. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

17. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure