Outer Rear View Mirror
MIRROR: OUTER REAR VIEW MIRROR: INSPECTION
1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (for TMC Made)
(a) Apply battery voltage and check the operation of the mirror.
OK:
(b) If the result is not as specified, replace the mirror assembly.
(c) w/ Mirror Heater:
(d) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the outer rear view mirror.
(3) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
* It will take a short time for the mirror to become warm.
* If the result is not as specified, replace the outer rear view mirror sub-assembly.
2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (for TMMC Made)
(a) Apply battery voltage and check the operation of the mirror.
OK:
(b) If the result is not as specified, replace the mirror assembly.
(c) w/ Mirror Heater:
(d) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the outer rear view mirror.
(3) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
* It will take a short time for the mirror to become warm.
* If the result is not as specified, replace the outer rear view mirror sub-assembly.
3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (for TMC Made)
(a) Apply battery voltage and check the operation of the mirror.
OK:
(b) If the result is not as specified, replace the mirror assembly.
(c) w/ Mirror Heater:
(d) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the outer rear view mirror.
(3) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
* It will take a short time for the mirror to become warm.
* If the result is not as specified, replace the outer rear view mirror sub-assembly.
4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (for TMMC Made)
(a) Apply battery voltage and check the operation of the mirror.
OK:
(b) If the result is not as specified, replace the mirror assembly.
(c) w/ Mirror Heater:
(d) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(2) If the result is not as specified, replace the outer rear view mirror.
(3) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
* It will take a short time for the mirror to become warm.
* If the result is not as specified, replace the outer rear view mirror sub-assembly.