Removal

2AR-FE COOLING: THERMOSTAT: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 ENGINE UNDER COVER Removal

4. REMOVE REAR ENGINE UNDER COVER RH Removal

5. REMOVE FAN & GENERATOR V BELT Removal

6. DRAIN ENGINE COOLANT Service and Repair

7. REMOVE GENERATOR ASSEMBLY

(a) Remove the generator assembly Removal.

8. DISCONNECT NO. 2 RADIATOR HOSE Removal

9. REMOVE WATER INLET

(a) Remove the 2 nuts and water inlet.





10. REMOVE THERMOSTAT

(a) Remove the thermostat.

(b) Remove the gasket from the thermostat.