Removal

2AR-FE COOLING: WATER PUMP: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

3. REMOVE RADIATOR SUPPORT OPENING COVER

(a) Using a clip remover, remove the 9 clips and radiator support opening cover.





4. REMOVE NO. 1 ENGINE UNDER COVER Removal

5. DRAIN ENGINE COOLANT Service and Repair

6. REMOVE REAR ENGINE UNDER COVER RH Removal

7. REMOVE RADIATOR RESERVOIR

(a) Disconnect the No. 1 and No. 2 water by-pass hoses.





(b) Remove the 2 bolts and radiator reservoir.

8. REMOVE FAN & GENERATOR V BELT Removal

9. REMOVE GENERATOR ASSEMBLY

(a) Remove the generator assembly Removal.

10. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

(a) Remove the bolt and V-ribbed belt tensioner.





11. REMOVE WATER PUMP ASSEMBLY

(a) Detach the clamp of the wire harness from the wire harness bracket.





(b) Remove the bolt and wire harness bracket.

(c) Remove the 7 bolts, water pump and water pump gasket.