Maintenance Indicator Reset

To reset the oil change system, follow the procedure below:

Vehicles without smart key system

Step 1: Turn the engine switch off with the trip meter A reading shown.
Step 2: While pressing the trip meter reset button, turn the engine switch to the "ON" position.
Step 3: Press and hold the button until the trip meter displays "000000".

Vehicles with smart key system

Step 1: Turn the "ENGINE START STOP" switch off with the trip meter A reading shown.
Step 2: While pressing the trip meter reset button, turn the "ENGINE START STOP" switch to IGNITION ON mode.
Step 3: Press and hold the button until the trip meter displays "000000".


Navigation Maintenance Information Setting (If equipped)

When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components.





1. Push the "INFO" button.





2. Touch "Maintenance"





3. Touch the desired button.

"Delete All": To cancel all conditions which have been input.

"Reset All" : To reset the item which has satisfied a condition.

"Set Dealer": To register or edit dealer information.

If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on.

If "OFF" is selected, the "Information" screen is disabled.

When the vehicle needs to be serviced, the touch screen button color will change to orange.





4. Input the conditions.

Notice of "Date": The next maintenance date can be input.

Notice of "Distance": The driving distance until the next maintenance check can be input.

"Delete": To cancel the date and distance conditions.

"Reset": To reset the date and distance conditions.

5. Touch "OK" The screen returns to the "Maintenance" screen.