Component Tests and General Diagnostics

TIRE / WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION

1. INSPECT TIRE

(a) Check the tires for wear and proper inflation pressure.

Standard Cold Tire Inflation Pressure:





(b) Using a dial indicator, check the tire runout.





Tire runout:

3.0 mm (0.118 in.) or less

2. ROTATE TIRE

HINT
Rotate the tires as shown in the illustration.





3. INSPECT WHEEL BALANCE

(a) Check and adjust the off-the-car balance.





(b) If necessary, check and adjust the on-the-car balance.

Standard imbalance after adjustment:

8 g (0.0180 lb) or less

NOTICE:
* Using a cleaning detergent, remove dirt, oil and water from the areas shown in the illustration (approximately 25 mm (0.993 in.)).





* Do not touch the adhesive part of the balance weight.
* Adhere the balance weight to the areas shown in the illustration.
* Push the balance weight securely with your fingers to attach it.
* Do not reuse the balance weight.
4. INSPECT FRONT AXLE HUB

Front Axle Hub

5. INSPECT REAR AXLE HUB

Rear Axle Hub