Taillight Relay Circuit

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: Taillight Relay Circuit
- Taillight Relay Circuit

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK TAILLIGHT

(a) Turn the light control switch to the TAIL position.

(b) Check that the taillight turns on.

OK:

Taillight turns on.

NG -- GO TO LIGHTING SYSTEM How To Proceed With Troubleshooting
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - BATTERY AND BODY GROUND)

(a) Disconnect the H43 clearance warning ECU connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Intuitive Parking Assist System