Installation

AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION

1. INSTALL NO. 2 RADIO BRACKET (w/ USB Audio System)

(a) Install the bracket with the 3 bolts.

2. INSTALL NO. 1 RADIO BRACKET (w/ USB Audio System)

(a) Install the bracket with the 3 bolts.

3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ USB Audio System)

(a) Connect the connectors.

(b) Insert the radio receiver and engage the 3 clips on its backside.

NOTICE:
When inserting the radio receiver, do not press its knobs.

(c) Install the radio receiver with the 4 bolts.

Torque : 7.0 Nm (71 kgf-cm, 61 in-lbf)

4. INSTALL NO. 2 RADIO BRACKET (w/o USB Audio System)

(a) Install the bracket with the 3 bolts.

5. INSTALL NO. 1 RADIO BRACKET (w/o USB Audio System)

(a) Install the bracket with the 3 bolts.

6. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o USB Audio System)

(a) Connect the connectors.

7. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

8. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL Installation

9. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

10. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

13. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Installation

14. INSTALL INSTRUMENT SIDE PANEL LH Installation

15. INSTALL COWL SIDE TRIM BOARD LH Installation

16. INSTALL FRONT DOOR SCUFF PLATE LH Installation