On-Vehicle Inspection

STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column): ON-VEHICLE INSPECTION

1. REMOVE UPPER STEERING COLUMN COVER Removal

2. REMOVE LOWER STEERING COLUMN COVER Removal

3. INSPECT TILT MOTOR





(a) Apply the 12 V battery voltage to the tilt motor connector. Then check the steering wheel tilt operation.

OK:





4. INSPECT TELESCOPIC MOTOR





(a) Disconnect connector A from the multiplex tilt and telescopic ECU.

(b) Apply 12 V battery voltage to the multiplex tilt and telescopic ECU connector. Then check the steering wheel telescopic operation.

OK:





5. INSTALL LOWER STEERING COLUMN COVER Installation

6. INSTALL UPPER STEERING COLUMN COVER Installation