Removal

EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL

1. REMOVE REAR QUARTER PANEL MUDGUARD LH





(a) Remove the 9 screws.

(b) Remove the clip and rear quarter panel mudguard.

2. REMOVE REAR QUARTER PANEL MUDGUARD RH

HINT
Use the same procedure as for the LH side.

3. REMOVE REAR BUMPER COVER





(a) Apply protective tape as shown in the illustration.

(b) Remove the 8 bolts, 2 screws and 2 clips.





(c) Disengage the 2 harness clamps and disconnect the connector.





(d) Disengage the 12 claws and remove the rear bumper cover.