Pinout Values and Diagnostic Parameters

MIRROR (EXT): POWER MIRROR CONTROL SYSTEM (w/ Memory): TERMINALS OF ECU

1. CHECK OUTER MIRROR CONTROL ECU





(a) Disconnect the M7 ECU connector.

(b) Measure the voltage and resistance of the wire harness side connector.





(c) If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the M7 ECU connector.

(e) Measure the voltage of the connector.









(f) If the result is not as specified, the ECU may have a malfunction.

2. CHECK MAIN BODY ECU





(a) Disconnect the DA and DD ECU connectors.

(b) Measure the voltage and resistance of the wire harness side connectors.





(c) If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the DA and DD ECU connectors.

(e) Measure the voltage of the connectors.





(f) If the result is not as specified, the ECU may have a malfunction.