Installation

BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR: INSTALLATION

1. INSTALL YAW RATE AND DECELERATION SENSOR

(a) Connect the yawrate sensor connector.

(b) Install the yawrate sensor with the 2 bolts.





Torque : 13 Nm (136 kgf-cm, 10 ft-lbf)

2. INSTALL COWL SIDE TRIM BOARD RH

(a) Install the nut with the cowl side trim board plate RH.

3. INSTALL FRONT DOOR SCUFF PLATE RH

4. INSTALL FRONT SEAT ASSEMBLY RH

HINT
Installation.

5. PERFORM YAW RATE AND DECELERATION SENSOR ZERO POINT CALIBRATION

HINT
Programming and Relearning.

6. CHECK ABS SPEED SENSOR SIGNAL

HINT
Vehicle Stability Control System.