Installation

AUDIO / VISUAL: RADIO ANTENNA HOLDER: INSTALLATION

1. INSTALL WITH HOLDER ANTENNA ASSEMBLY

(a) Tie the string inside the pillar to the new antenna assembly (with holder).

(b) Using the string, fit the antenna assembly (with holder) into the pillar.

(c) Connect the connector and install the 3 clamps.





(d) Install the antenna ornament with the nut.





(e) Install the with holder antenna assembly with the bolt.





2. INSTALL PULL TOP ANTENNA POLE SUB - ASSEMBLY Installation

3. INSTALL FRONT PILLAR GARNISH RH Installation

4. INSTALL ASSIST GRIP SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH Installation

6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)