Installation

BRAKE: REAR BRAKE: INSTALLATION

1. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

(a) Install a new drum gasket onto the rear brake drum.

(b) Install the rear brake drum.

2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE





(a) Provisionally install the hub nuts.

(b) Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

(c) Using a screwdriver, release the adjuster 15 notches.

(d) Install the hole plug.

3. FILL RESERVOIR WITH BRAKE FLUID (for Vacuum Brake Booster) Brake Fluid (for Vacuum Brake Booster)

4. BLEED MASTER CYLINDER (for Vacuum Brake Booster) Brake Fluid (for Vacuum Brake Booster)

5. BLEED BRAKE LINE (for Hydraulic Brake Booster) Brake Fluid

6. BLEED BRAKE LINE (for Vacuum Brake Booster) Brake Fluid (for Vacuum Brake Booster)

7. BLEED BRAKE ACTUATOR (for Vacuum Brake Booster) Brake Fluid (for Vacuum Brake Booster)

8. INSPECT FLUID LEVEL IN RESERVOIR (for Vacuum Brake Booster) Brake Fluid (for Vacuum Brake Booster)

9. INSPECT FOR BRAKE FLUID LEAK (for Vacuum Brake Booster)

10. INSTALL REAR WHEEL

Torque : 113 Nm (1152 kgf-cm, 83 ft-lbf)

11. INSPECT PARKING BRAKE PEDAL TRAVEL (for Automatic Transmission) Adjustments

12. INSPECT PARKING BRAKE LEVER TRAVEL (for Manual Transmission) Adjustments

13. ADJUST PARKING BRAKE PEDAL TRAVEL (for Automatic Transmission) Adjustments

14. ADJUST PARKING BRAKE LEVER TRAVEL (for Manual Transmission) Adjustments