The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
- The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CELLULAR PHONE

(a) Check if the voice on the other side can be heard using a cellular phone.

OK:

Voice can be heard.

NG -- REPAIR OR REPLACE CELLULAR PHONE
OK -- Continue to next step.

2. CHECK AUDIO AND VISUAL SYSTEM

(a) Check that audio sound can be heard from the driver side speaker.

OK:

Audio sound can be heard.

HINT
If audio sound cannot be heard, proceed to "No Sound can be Heard from Speakers" in Problem Symptoms Table Problem Symptoms Table.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table
OK -- Continue to next step.

3. CHECK SETTINGS

(a) Check that the received voice level setting on the cellular phone is not too low.

OK:

The received voice level setting is not too low.

NG -- SET VOLUME TO HIGH

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table