Removal

CRUISE CONTROL: CLUTCH SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT FLOOR FOOTREST Removal

3. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) Removal

4. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab) Removal

5. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) Removal

6. REMOVE COWL SIDE TRIM BOARD LH (for Regular Cab) Removal

7. REMOVE COWL SIDE TRIM BOARD LH (for Access Cab) Removal

8. REMOVE COWL SIDE TRIM BOARD LH (for Double Cab) Removal

9. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Removal

10. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Removal

11. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Disassembly

12. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

13. SEPARATE DRIVER SIDE JUNCTION BLOCK

(a) Remove the 2 bolts and bracket.





(b) Remove the 2 nuts and separate the driver side junction block assembly.

14. REMOVE CLUTCH SWITCH ASSEMBLY

(a) Disconnect the connector.





(b) Loosen the nut and remove the clutch switch assembly.