Removal

SUSPENSION: FRONT STABILIZER BAR (for 4WD and Pre-Runner): REMOVAL

1. REMOVE FRONT WHEELS

2. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY NO. 1

3. REMOVE FRONT STABILIZER LINK ASSEMBLY LH





(a) Remove the 2 nuts and front stabilizer link LH.

HINT
If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

4. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT
The removal procedure for the RH side is the same as that for the LH side.

5. REMOVE FRONT STABILIZER BRACKET NO. 1 LH





(a) Remove the 2 bolts and front stabilizer bracket.

6. REMOVE FRONT STABILIZER BRACKET NO. 1 RH

HINT
The removal procedure for the RH side is the same as that for the LH side.

7. REMOVE FRONT STABILIZER LOWER BRACKET BUSH LH

8. REMOVE FRONT STABILIZER LOWER BRACKET BUSH RH

9. REMOVE FRONT STABILIZER BAR