Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL
1. BOLT, SCREW AND NUT TABLE Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE FRONT FLOOR FOOTREST Removal
4. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) Removal
5. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab) Removal
6. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) Removal
7. REMOVE COWL SIDE TRIM BOARD LH (for Regular Cab) Removal
8. REMOVE COWL SIDE TRIM BOARD LH (for Access Cab) Removal
9. REMOVE COWL SIDE TRIM BOARD LH (for Double Cab) Removal
10. REMOVE INSTRUMENT PANEL UNDER TRAY (for Automatic Transmission) Removal
11. REMOVE INSTRUMENT PANEL HOLE COVER (for Manual Transmission) Removal
12. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Removal
13. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Removal
14. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Removal
15. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Removal
16. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Removal
17. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Removal
18. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Removal
19. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Removal
20. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal
21. REMOVE RADIO RECEIVER ASSEMBLY Removal
22. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Disassembly
23. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal
24. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
25. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Removal
26. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
27. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH Removal
28. REMOVE LOWER INSTRUMENT PANEL LH Removal
29. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY Removal
30. REMOVE TIRE PRESSURE WARNING ECU
(a) Disconnect the connector.
(b) Remove the 2 screws and the tire pressure warning ECU.