Disassembly

SEAT: REAR SEAT ASSEMBLY (for Access Cab): DISASSEMBLY

HINT
The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified.

1. REMOVE REAR SEAT BACK COVER LH

(a) Remove the 2 screws.





(b) Disengage the 2 claws and remove the rear seat back cover LH.

2. REMOVE REAR SEAT BACK LOCK COVER LH

(a) Remove the 2 screws and rear seat back lock cover LH.





3. REMOVE REAR SEAT CUSHION UNDER COVER LH

(a) Remove the screw and rear seat cushion under cover LH.





4. REMOVE REAR SEAT CUSHION COVER LH

(a) Remove the screw and rear seat cushion cover LH.





5. REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH

(a) Remove the bolt and rear seat hinge sub- assembly LH.





6. REMOVE REAR SEAT LOCK HANDLE LH

(a) Using a screwdriver with its tip taped in protective tape, disengage the claw and remove the rear seat lock handle LH.





7. REMOVE REAR SEAT CUSHION SUPPORT BRACKET SUB-ASSEMBLY LH

(a) Using "TORX" socket wrench T30, remove the bolt.





(b) Remove the bolt and rear seat cushion support bracket sub-assembly LH.

8. REMOVE REAR SEAT LOCK ASSEMBLY

(a) Remove the bolt and rear seat lock assembly.





9. REMOVE REAR SEAT CUSHION COVER

(a) Disengage the hook.





(b) Remove the rear seat cushion cover and sub seat cover board.

10. REMOVE REAR SEAT CUSHION FRAME LH

(a) Remove the rear seat cushion frame.