Installation

1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring of the sensor.

(b) Install the sensor with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

2. CONNECT COOLER COMPRESSOR ASSEMBLY Installation

3. INSTALL GENERATOR ASSEMBLY Installation

4. INSTALL FAN & GENERATOR V BELT Installation

5. INSTALL NO. 1 ENGINE UNDER COVER Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL