Removal

1GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INTAKE AIR SURGE TANK

(a) Remove the intake air surge tank Removal.

3. DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY Removal

4. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY Removal

5. REMOVE INTAKE MANIFOLD





(a) Disconnect the 6 fuel injector connectors.

(b) Remove the 10 bolts, intake manifold and 2 gaskets.

6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Disconnect the sensor connector.

(b) Remove the sensor.

(c) Remove the gasket from the sensor.