Installation

1GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

1. INSTALL VVT SENSOR (for Bank 2)





(a) Apply a light coat of engine oil to the O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Connect the sensor connector.





(d) Connect the No. 4 and No. 5 water by-pass hoses.

2. INSTALL VVT SENSOR (for Bank 1)





(a) Apply a light coat of engine oil to the O-ring of the sensor.

(b) Install the sensor with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Connect the sensor connector.

3. INSTALL AIR CLEANER ASSEMBLY WITH ELEMENT Installation

4. INSTALL NO. 2 AIR CLEANER HOSE Installation

5. ADD ENGINE COOLANT Service and Repair

6. INSPECT FOR ENGINE COOLANT LEAK Testing and Inspection

7. INSTALL V-BANK COVER Installation

8. INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY Installation

9. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY

(a) Install the front wiper motor and link assembly Installation.

10. INSTALL NO. 1 ENGINE UNDER COVER Installation