Reverse Signal Circuit

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/o Navigation System): Reverse Signal Circuit
- Reverse Signal Circuit

DESCRIPTION

The inner rear view mirror assembly receives a reverse signal from the park/neutral position switch assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK INNER REAR VIEW MIRROR ASSEMBLY





(a) Disconnect the W1 inner rear view mirror assembly connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





NG -- CHECK HARNESS AND CONNECTOR (INNER REAR VIEW MIRROR - PARK/NEUTRAL POSITION SWITCH)

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Rear View Monitor System (w/o Navigation System)

2. CHECK HARNESS AND CONNECTOR (INNER REAR VIEW MIRROR - PARK/NEUTRAL POSITION SWITCH)





(a) Disconnect the W1 inner rear view mirror assembly connector.

(b) Disconnect the D35 park/neutral position switch assembly connector.

(c) Measure the resistance the according to the value(s) in the table below.

Standard Resistance:





HINT
*: Park/neutral position switch assembly replacement procedure:

* for A750E:
* for A760E:
* for A760F: Removal
* for AB60E:
* for AB60F:

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY*