Installation

LIGHTING: HIGH MOUNTED STOP LIGHT ASSEMBLY: INSTALLATION

HINT
* Perform these procedures only when replacing the high mounted stop light assembly.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts
1. INSTALL HIGH MOUNTED STOP LIGHT GASKET

(a) Install the new gasket.

2. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY

(a) Connect the connectors and clamp.





(b) Install the stop light with the 2 nuts.

3. INSTALL ROOF HEADLINING ASSEMBLY

(a) for Regular Cab:

Install the roof headlining Installation.

(b) for Double Cab:

Install the roof headlining Installation.