Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1AR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the sensor.





Text in Illustration:





(b) Install the engine coolant temperature sensor.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE Installation

3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Installation

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

5. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY Installation

6. ADD ENGINE COOLANT Service and Repair

7. INSPECT FOR COOLANT LEAK Testing and Inspection

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

9. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

10. INSTALL WINDSHIELD WIPER MOTOR AND LINK

(a) Install the windshield wiper motor and link Installation.

11. INSTALL NO. 2 ENGINE UNDER COVER

12. INSTALL NO. 1 ENGINE UNDER COVER
pro multis · About Operation CHARM