Installation

1NZ-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

1. INSTALL ECM BRACKET NO. 2

(a) Install ECM bracket No. 2 with the 2 screws.

2. INSTALL ECM BRACKET

(a) Install the ECM bracket with the 2 screws.

3. INSTALL ECM

(a) Install the ECM with the bolt and 2 nuts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the 2 ECM connectors.

(c) Install the 2 lock knobs and harness clamp.

4. INSTALL COWL TOP PANEL OUTER (for Hatchback) Installation

5. INSTALL COWL TOP PANEL OUTER (for Sedan)

(a) Install the cowl top panel outer and install the 8 bolts.

Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)

(b) Install the cowl top panel outer center bracket and install the 2 bolts.

Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)

(c) Connect the wire harness and engage the claw.

6. INSTALL FRONT AIR SHUTTER SEAL (for Sedan)

(a) Install the front air shutter seal and engage the 3 claws.

7. INSTALL COWL TO REGISTER DUCT SUB-ASSEMBLY NO. 2 (for Hatchback) Installation

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Hatchback) Installation

9. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Sedan) Installation

10. INSTALL COWL TOP VENTILATOR LOUVER LH (for Hatchback) Installation

11. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Hatchback) Installation

12. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Sedan) Installation

13. INSTALL HOOD TO COWL TOP SEAL (for Hatchback) Installation

14. INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY LH (for Sedan) Installation

15. INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY RH (for Sedan) Installation

16. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Hatchback) Installation

17. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Sedan) Installation

18. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Hatchback) Installation

19. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Sedan) Installation

20. INSTALL FRONT WIPER ARM HEAD CAP (for Hatchback) Installation

21. INSTALL FRONT WIPER ARM HEAD CAP (for Sedan) Installation

22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)