Removal

2TR-FE EMISSION CONTROL: AIR SWITCHING VALVE: REMOVAL

1. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER CASE Removal

3. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH Removal

4. DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE

(a) Disconnect the No. 1 air injection system hose.





5. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 5 bolts and No. 1 exhaust manifold heat insulator.

HINT
* It is only necessary to move the No. 1 exhaust manifold heat insulator so that the intake pipe can be removed in a later step.
* It is not possible to fully remove the No. 1 exhaust manifold heat insulator in this step.





6. REMOVE NO. 4 INTAKE PIPE

(a) Disconnect the vacuum hose.





(b) Remove the 4 nuts, No. 4 intake pipe and 2 gaskets.

NOTICE:
Be careful not to damage the installation surface of the gaskets.

7. REMOVE AIR SWITCHING VALVE ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 2 nuts and air switching valve.

(c) Remove the No. 1 exhaust manifold heat insulator.