Intake Manifold

INTAKE MANIFOLD

Install the purge line hose to the intake manifold.

Install the 2 wire harness clamp brackets to the intake manifold with the 2 bolts.

Torque 8.0 Nm (82 kgf-cm, 71 in-lbf)

Install a new gasket to the intake manifold.

Text in Illustration










Install the intake manifold with the 5 bolts and 2 nuts.

Torque 25 Nm (255 kgf-cm, 18 ft-lbf)

for Engine Rear Side:

Attach the No. 2 water by-pass hose and connect the No. 3 ventilation hose to the intake manifold.






for Engine Front Side:

Attach the 2 wire harness clamps to the 2 wire harness clamp brackets.