Removal

2GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

1. REMOVE ENGINE UNDER COVER LH

2. REMOVE ENGINE UNDER COVER RH

3. DRAIN ENGINE COOLANT Testing and Inspection

4. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH Removal

5. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH Removal

6. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal

7. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal

8. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

9. REMOVE WINDSHIELD WIPER MOTOR AND LINK Removal

10. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY Removal

11. REMOVE COOL AIR INTAKE DUCT SEAL Removal

12. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

13. REMOVE AIR CLEANER INLET ASSEMBLY Removal

14. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

15. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

16. REMOVE NO. 1 AIR CLEANER INLET Removal

17. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

18. REMOVE VVT SENSOR (for Bank 1 Intake Side)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

19. REMOVE VVT SENSOR (for Bank 1 Exhaust Side)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

20. REMOVE VVT SENSOR (for Bank 2 Intake Side)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

21. REMOVE VVT SENSOR (for Bank 2 Exhaust Side)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.