Disassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY

1. REMOVE NO. 1 HEATER TO REGISTER DUCT

(a) Remove the 3 screws [I] and the No. 1 heater to register duct.





2. REMOVE NO. 4 HEATER TO REGISTER DUCT

(a) Remove the 3 screws [I] and the No. 4 heater to register duct.





3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Remove the screw [I] and the side No. 1 defroster nozzle duct.





4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Remove the screw [I] and the side No. 2 defroster nozzle duct.





5. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the clip.





(b) Remove the 3 screws [F] and the defroster nozzle assembly.

6. REMOVE CENTER HEATER TO REGISTER SUB DUCT

(a) Remove the 2 screws [I] and the center heater to register sub duct.





7. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Remove the 3 screws [I] and the No. 1 instrument panel register assembly.





8. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Remove the 3 screws [I] and the No. 2 instrument panel register assembly.





9. REMOVE NAVIGATION ANTENNA ASSEMBLY Removal

10. REMOVE ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type) Removal

11. REMOVE ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type) Removal

12. REMOVE NO. 4 INSTRUMENT PANEL WIRE

(a) Disconnect the connector.





(b) Disengage the 5 clamps and remove the No. 4 instrument panel wire.

13. REMOVE COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)

(a) Disengage the 2 claws and remove the cooler switch hole cover.





14. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System) Removal

15. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY Removal