Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Connect the connector.





(b) Install the tire pressure warning receiver assembly with the bolt.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

2. INSTALL ROOF HEADLINING ASSEMBLY

HINT
Refer to the instructions for INSTALLATION of the roof headlining Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure.