Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

Hazard Warning Switch: Testing and Inspection

LIGHTING (EXT): HAZARD WARNING SWITCH: INSPECTION

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

If the result is not as specified, replace the switch.

(b) Connect a positive (+) lead from the battery to terminal 3 and a negative (-) lead to terminal 2.

(c) Check that the illumination of the switch comes on.

OK:

The illumination comes on.

If the result is not as specified, replace the switch.