Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Installation
2ZR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION
1. INSTALL SPARK PLUG
(a) Using a 14 mm spark plug wrench, install the 4 spark plugs.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
2. INSTALL IGNITION COIL ASSEMBLY
(a) Install the 4 ignition coils with the 4 bolts.
Torque : 10 Nm (102 kgf-cm, 7.4 ft-lbf)
NOTICE:
When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.
(b) Connect the 4 ignition coil connectors.
3. INSTALL NO. 2 CYLINDER HEAD COVER Installation