Reassembly

U341E AUTOMATIC TRANSMISSION / TRANSAXLE: OIL PUMP: REASSEMBLY

1. INSTALL CLUTCH DRUM OIL SEAL RING

(a) Coat 2 new clutch drum oil seal rings with ATF, and install them to the stator shaft.





2. INSTALL FRONT OIL PUMP OIL SEAL

(a) Using SST and a hammer, install the front oil pump oil seal to the oil pump body.





SST : 09950-60010

09951-00550

SST : 09950-70010

09951-07100

Oil seal driven in depth:

-0.15 to 0.15 mm (-0.00590 to 0.00590 in.)

3. INSTALL FRONT OIL PUMP DRIVEN GEAR

(a) Coat the front oil pump driven gear with ATF, and install it to the oil pump body with the marked side facing upward.





4. INSTALL FRONT OIL PUMP DRIVE GEAR

(a) Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side facing upward.





5. INSTALL STATOR SHAFT ASSEMBLY

(a) Using "TORX" socket wrench T30, install the stator shaft assembly with the 10 "TORX" screws.





Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

6. INSPECT OIL PUMP ASSEMBLY

(a) Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.





NOTICE:
Do not damage the oil seal lip.

7. INSTALL FRONT OIL PUMP BODY O-RING

(a) Coat a new front oil pump body O-ring with ATF, and install it to the oil pump.