Removal

CLUTCH: CLUTCH MASTER CYLINDER: REMOVAL

1. REMOVE BRAKE BOOSTER ASSEMBLY

Removal.

2. DISCONNECT CLUTCH RESERVOIR TUBE

(a) Loosen the clamp and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

HINT
Use a container to collect the fluid.

NOTICE:
Wash off clutch fluid immediately if it comes in contact with any painted surface.

3. DISCONNECT CLUTCH LINE





(a) Using a union nut wrench (10 mm), disconnect the clutch line.

HINT
Use a container to collect the fluid.

4. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

(a) Remove the clip and hole pin to remove the clevis from the clutch pedal sub-assembly.





(b) Remove the 2 nuts and clutch master cylinder.





(c) Remove the clutch master cylinder bracket.