C1626

PARK ASSIST / MONITORING: ADVANCED PARKING GUIDANCE SYSTEM: C1626: Steering Angle Sensor Failure
C1626 - Steering Angle Sensor Failure

DESCRIPTION

This DTC is stored if the parking assist ECU receives a signal via CAN communication from the spiral with sensor cable sub-assembly that indicates an internal malfunction.





INSPECTION PROCEDURE

NOTICE:
* When "System initializing" message is displayed on the navigation receiver assembly after the battery terminal disconnected, correct the steering angle neutral point Initialization.
* Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the advanced parking guidance system may be needed Calibration.

PROCEDURE

1. REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

(a) Replace the spiral with sensor cable sub-assembly Removal.

NEXT -- Continue to next step.

2. CHECK DTC OUTPUT

(a) Clear the DTCs Advanced Parking Guidance System.

(b) Check for DTCs Advanced Parking Guidance System.

Result:





B -- END

A -- REPLACE PARKING ASSIST ECU Removal