Installation

SEAT: FRONT SEATBACK HEATER: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

(a) Using hog ring pliers, install 2 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

(b) Using hog ring pliers, install 5 new hog rings





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

2. INSTALL FRONT SEATBACK COVER WITH PAD Reassembly

3. INSTALL FRONT SEAT CUSHION COVER WITH PAD Reassembly

4. INSTALL FRONT SEAT CUSHION INNER SHIELD Reassembly

5. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

6. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

7. INSTALL VERTICAL ADJUSTING HANDLE Reassembly

8. INSTALL RECLINING ADJUSTER RELEASE HANDLE Reassembly

9. INSTALL FRONT SEAT ASSEMBLY Installation

10. INSTALL INNER SEAT TRACK COVER Installation

11. INSTALL OUTER SEAT TRACK COVER Installation

12. INSTALL FRONT SEAT HEADREST ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSTALL REAR NO. 3 FLOOR BOARD Installation

15. INSTALL REAR DECK FLOOR BOX Installation

16. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

17. INSPECT FRONT SEAT ASSEMBLY Installation

18. INSPECT SRS WARNING LIGHT

Diagnosis System