Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

1. INSTALL REAR LIGHT GUIDE

(a) Install 2 new rear light guides.





2. INSTALL REAR COMBINATION LIGHT GASKET

(a) Install a new rear combination light gasket.





3. INSTALL REAR BUMPER UPPER RETAINER

(a) Engage the claw and install the rear bumper upper retainer.





4. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

(a) Engage the clamp.





(b) Connect the connector.

(c) Turn the cap in the direction indicated by the arrow shown in the illustration to install the cap of the rear combination light socket and wire sub-assembly.





5. INSTALL BACK-UP LIGHT BULB

(a) Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the back-up light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.





6. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.





7. INSTALL REAR COMBINATION LIGHT BODY GASKET

(a) Install a new rear combination light body gasket.