Installation

WIPER / WASHER: WASHER MOTOR (for Front Side): INSTALLATION

1. INSTALL FRONT WASHER MOTOR AND PUMP ASSEMBLY

(a) Install the windshield washer motor and pump assembly.





(b) Connect the connector.

(c) Connect the washer hose.

2. ADD WASHER FLUID

(a) Add washer fluid to the washer jar.

3. INSTALL FRONT FENDER LINER RH

(a) Install a new grommet and the 4 screws.





(b) Install the 10 clips.

(c) Install the pin hold clip as shown in the illustration.





Text in Illustration





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

4. INSTALL FRONT WHEEL RH

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)